High Pressure Turbine In Thermal Power Plant
High Pressure Turbine In Thermal Power Plant. The thermal power plant also called thermal power station finds use to convert heat energy to electric power for household and commercial applications. Steam exhausted from lp turbine is not in condensed form and it is not economical to compress the steam at a very high pressure around 150 kg/cm2.
So, it is necessary that the plant must be located near the bank of a river or at a place where a continuous supply of water is available. Boiler in thermal power plant accumulates the steam and build up a pressure to expend it in turbine and convert thermal energy to mechanical energy. The generator which is connected to turbine converts the mechanical energy into electric energy.
The Blade Material Is Of 12% Cr.
It will make the turbine rotor to run at a very high speed ( up to 3000 rpm ). Boiler in thermal power plant accumulates the steam and build up a pressure to expend it in turbine and convert thermal energy to mechanical energy. Thermal power plants and thermodyne.
If Total Pressure Drop Carried Out In One Stage Only, Then The Velocity Of Steam Entering Into The Turbine Will Be Extremely High.
Hp turbine control valves are sized to pass the main steam flow that will result in 100% reactor power while not fully open to provide some controllability at full power operation. Steam exhausted from lp turbine is not in condensed form and it is not economical to compress the steam at a very high pressure around 150 kg/cm2. Analyses showed that both steam turbines and power plant performance were reduced when the power plant operates at partial load conditions.
Here Steam Is Expanded Till The Saturation Point Is Reached.
So, it is necessary that the plant must be located near the bank of a river or at a place where a continuous supply of water is available. In this study, it is aimed to analyses the isentropic efficiency of a high pressure steam turbine and thermal efficiency of power plant at different load conditions. In a thermal power plant, to complete the cyclic operation, we need to send water again to the economizer at high pressure.
Hazard Identification And Risk Assessment Is Systematic Approach To Protect The Health And Minimize Danger To Life, Property And Environment.
Thermodyne engineering systems has a wide experience in boiler manufacturing that generate high pressure and temperature steam required to rotate the turbine and generate electricity. The generator which is connected to turbine converts the mechanical energy into electric energy. The optimal last stage blade (lsb) length and number of casings is selected based on the steam exhaust conditions.
In This Article, We Explain How Electricity Is Generated By Reviewing The Flow.
This compact frame turbine (srt) can reduce construction costs. We have already learned that the rankine cycle consists of main four components, pump; So a device is needed which can condense the steam into water.
Post a Comment for "High Pressure Turbine In Thermal Power Plant"