Why Condenser Is Used In Thermal Power Plant
Why Condenser Is Used In Thermal Power Plant. Condenser like surface condenser is used in the thermal power plant to condensate the exhaust steam from the turbine. As the operating pressure of the condenser is lowered (vacuum is increased), the enthalpy drop of the expanding steam in the turbine will also increase.
If condenser don't condense the steam, then feed pump will not pump the steam. The steam is converted from gaseous to liquid state at a pressure level below atmospheric pressure. After expansion of superheated steam in steam turbine, steam becomes dry saturated.
In So Doing, The Latent Heat Is Given Up By The Substance, And Will Transfer To The Condenser Coolant.
A condenser means a heat exchanger, it is used to exchange heat between the turbine exhaust and the cooling water. Steam exhausted from lp turbine is not in condensed form and it is not economical to compress the steam at a very high pressure around 150 kg/cm2. The most effective way for reaching this aim is to use a condenser.
(Here, If Not Dry Saturated, In Such Cases, Dryness Fraction Must Be Above 0.88 ) Further Process Is To Condense This Steam At Constant Pressure To Water.
The use of condenser in steam power plant reduces the overall cost of the generation by increasing the thermal efficiency of the power plant. How vacuum is maintained in condenser? Using the condensate as feed for boiler.
The Advantages Obtained By Employing A Condenser In Steam Power Plant Is Listed Below:
2.the efficiency of the thermal power plant increases as the enthalpy drop increases by. The condensed steam is known as condensate. In this lecture we will discuss why condenser is used in steam power plant.because condenser is one of the important component of steam power plant.in this l.
So A Device Is Needed Which Can Condense The Steam Into Water.
The efficiency of the steam power plant is increased by the use of a condenser. The lower the pressure, the higher the efficiency and power are. The condensed steam, from the condenser is used as feed water for boiler.
A Thermal Power Plant Converts The Energy Of Fuel Into Power Output Or Electricity.
In thermal power plant condencer is used to condence the exaust stem from a stem turbine to obtain maximum efficency and also to convert the turbine exhaust s… arnab419 arnab419 23.11.2017 It has water many tubes and heat exchange happens based on the types of cooling towers. In a thermal powerpalnt, condensor is a device that is used to convert dry saturated stream in water.
Post a Comment for "Why Condenser Is Used In Thermal Power Plant"